Allied Telesis AR700 Series - Manual (Page 22)

Features in 275-03 22
Version 275-05
C613-10473-00 REV D
CR00008244 Switch 2 When a user entered the command disable switch port automdi and saved the
configuration with the create config command, the resulting configuration file
did not include that command.
This issue has been resolved.
- - - - - - - Y Y -
CR00008993 IPv6 2 IPv6 sometimes dropped a few data packets after the neighbour cache entry
went to a Stale state while forwarding under heavy load.
This issue has been resolved.
Y Y Y Y Y - - Y Y Y
CR00009079 MLD
Switch
2 When the “All Router” group is added to the MLD Snooping database, all of its
member ports will also be added to other groups. When MLD Snooping detected
that there were no more router ports in the network, it correctly deleted the “All
Router” group but did not delete its former member ports from other groups.
This issue has been resolved.
Y Y Y Y Y - - Y Y Y
CR00009386 SSH 2 Previously, when the router or switch had encryption hardware installed, a slow
memory leak occurred after multiple consecutive SSH connections were
established.
This issue has been resolved.
- Y - Y - - - - - -
CR00010177 Firewall 2 When a session had been initiated from the LAN side of the firewall and the SIP
ALG received a re-invite packet for that session from the WAN side, the SIP ALG
did not replace the Call ID string in the re-invite packet.
This issue has been resolved.
Y Y Y Y Y - - - - Y
CR00010232 STP 2 STP and RSTP did not work correctly when a static MAC filter was added.
This issue has been resolved, so that control traffic is not incorrectly discarded in
the presence of configured switch filters. Also, configured switch filters are now
applied to locally generated control traffic.
- - - Y Y Y - Y Y Y
CR Module Level Description A
R
400
A
R
7x5
A
R
750
S
Ra
p
ie
r
i
AT
-8
8
0
0
AT
-8
6
0
0
A
T
-87
00X
L
AT
-8
9
4
8
AT
-9
9
0
0
AT
-9
8
0
0