Allied Telesis AR700 Series - Manual (Page 45)

Displaying Routes Learned from a Specific BGP Peer (CR00011724) 45
Version 275-05
C613-10473-00 REV D
Displaying Information about the Routes from a Peer
To display information about each route learned from a specific peer, use the new peer parameter in the command:
show bgp route[=prefix] [peer=ip-address] [other optional parameters]
The peer parameter specifies the IP address of the peer. If you specify a peer, the router or switch only displays routes that it learned from that peer. If you
specify the router or switch’s router ID, it displays all locally originated routes. The peer parameter has no default.
Note that this enhancement did not change any fields in the output of the show bgp route command; it simply provides another method of filtering the
displayed routes.