Adaptec SBC-599 - Manual (Page 59)

Chapter 4 Award BIOS Setup 49
USER PASSWORD
To change the password, choose the USER PASSWORD option
form the Setup main menu and press <Enter>.
1. If the CMOS is bad or this option has never been used, a
default password is stored in the ROM. The screen will
display the following messages:
Enter Password:
Press <Enter>.
2. If the CMOS is good or this option has been used to change
the default password, the user is asked for the password
stored in the CMOS. The screen will display the following
message:
Confirm Password:
Enter the current password and press <Enter>.
3. After pressing <Enter> (ROM password) or the current
password (user-defined), you can change the password
stored in the CMOS. The password can be at most eight (8)
characters long.
Remember - to enable this feature, you must first select either
Setup or System in the BIOS FEATURES SETUP.