Adaptec SBC-599 - Manual (Page 60)

50 SBC-596/599 User's Manual
AUTO DETECT HARD DISK
The IDE HDD AUTO DETECTION utility can automatically
detect the IDE hard disk installed in your system. You can use it
to self-detect and/or correct the hard disk type configuration.
*IDE HDD auto detection screen
Save & exit setup
If you select this option and press <Enter>, the values entered in
the setup utilities will be recorded in the chipset’s CMOS memory.
The microprocessor will check this every time you turn your
system on and compare this to what it finds as it checks the
system. This record is required for the system to operate.
Exit without saving
Selecting this option and pressing <Enter> lets you exit the Setup
program without recording any new values or changing old ones.
*Your BIOS configuration screen will look similar to this screen
capture. The actual screen may vary, owing to different BIOS
versions