Adaptec SBC-599 - Manual (Page 63)

Chapter 5 PCI SVGA Setup (SBC-599 only) 53
Installation
The drivers include Windows 3.1, Windows 95, Windows NT
drivers, and OS/2 drivers.
Simultaneous display mode
The 65550 VGA BIOS supports monochrome LCD, EL, color TFT
and STN LCD flat panel displays. It also supports interlaced and
non-interlaced analog monitors (VGA color and VGA monochrome)
in high-resolution modes while maintaining complete IBM VGA
compatibility. Digital monitors (i.e. MDA, CGA, and EGA) are NOT
supported. Multiple frequency (multisync) monitors are supported
as analog monitors.
Both CRT and panel displays can be used simultaneously. The
SBC-599 can be set in one of three configurations: on a CRT,
on a flat panel display, or on both simultaneously. The system is
initially set to simultaneous display mode. In the utility diskette,
there are three .COM files that can be used to select the display.
Simply type the filename at the DOS prompt:
CT.COM Enables CRT display only
FP.COM Enables panel display only
SM.COM Enables both displays at the same time.