Adaptec SBC-599 - Manual (Page 90)

80 SBC-596/599 User's Manual
ADAPTEC EZ-SCSI UTILITY
Adaptec EZSCSI gives you what you need to use your SCSI
devices most effectively with Windows 95 and Windows NT.
You can also use Adaptec EZSCSI on computers running DOS,
Windows 3.1x, or Windows for Workgroups 3.1x.
Quick Start Instructions
First, install SCSI devices (see the hardware documentation for
details). Then follow the instructions for your operating system
software in one of the following sections. We recommend that
after you install Adaptec EZSCSI you run SCSITutor to learn
more about the features of SCSI.
Windows 95 or Windows NT
If you want to install Windows 95 or Windows NT on a new
computer system, you may not be able to access your SCSI
CDROM drive at first. (Usually, you install Windows 95 and
Windows NT from a CDROM disc.) To gain access to your
CDROM drive, follow the DOS Quick Start instructions. Then
reboot your computer and follow these instructions:
1. Install Windows 95 or Windows NT version 3.51 or above,
and start it running on your computer.
2. Insert the Supporting CD-ROM to CD-ROM drive.
3. Click the Start button and select Run.
4. Type CD-ROM drive:\CD ROM\”model name”\driver\scsi
\scsi lite\setup.exe. Then click OK.
5. Follow the instructions that appear on the screen.