Adaptec SBC-599 - Manual (Page 99)

Chapter 6 SCSI Setup and Configurations 89
5. When the number of cylinders is what you want, press Esc.
When the confirmation prompt appears, select Yes and
press Enter to create the partition. To create more partitions
on the same disk device, repeat steps 3,4, and 5. As you
create partitions on the disk., they are added to the window
at the upper right of the screen.
6. Press Esc to return to the “Select SCSI Device to Partition”
window. If you want to partition a different disk device,
select the device from the list and repeat the earlier steps.
7. To quit afdisk, press Esc and select Yes to confirm that you
want to quit.