Sony DCR-HC1000 - Manual (Page 104)

Dubbing/Editing 104
7
Select [PictBridge], then touch .
8
Touch .
9
Connect the USB jack (p. 133) of your
camcorder to a printer using the
supplied USB cable.
The location of the USB jack of the printer
differs depending on the model. Refer to the
operating instructions supplied with your
printer for details on operation.
10
Select (PICT. APPLI), then
[PRINT] by touching / and .
When connection between your camcorder
and printer is complete,
appears on the
screen.
One of the images stored on the “Memory
Stick Duo” will be displayed.
b Note
• We cannot guarantee the operation of models that
are not PictBridge compatible.
• You cannot connect your camcorder to the printer if
[USB-PLY/EDT] in the menu settings is not set to
[PictBridge]. Follow the instructions shown on the
screen.
Printing
1
Select the image to be printed by
touching
(previous image)/
(next image).
2
Touch , then [COPIES].
3
Select the number of copies to be
printed by touching
/ , then
touch .
You can set a maximum of 20 copies of one
image to be printed.
4
Touch [END].
To print the date on the image
1 Touch , then [DATE/TIME].
2 Select [DATE] or [DAY & TIME] and
.
The default setting is [OFF].
5
Touch [EXEC].
A confirmation screen appears.
6
Touch [YES].
When printing is finished, [Printing...]
disappears and the image selection screen
appears again.
To print another image
Repeat steps 1 to 6.
To stop printing
Touch [CANCEL] while printing.
To finish printing
Touch [END] and disconnect the USB cable
from your camcorder and printer.
PRINT
101-0001
EXEC SET + -
101 1 / 10
END
PictBridge
connecting
PRINT
COPIES 1
DATE/TIME OFF
Print this?
101-0001
101 1 / 10
PRINT
101-0001
CANCEL
101 1 / 10
Printing...
Keep USB cable connected.