Sony MVC-CD400 - Manual (Page 103)

model name1[MVC-CD400/CD250]
[3-075-356-12(1)]
filename[C:\MVC-CD400Nouhinn\3075356121\307535612MVCCD400U2\13trb.fm]
masterpage:Right
103
Tr
oubl
e
s
ho
oti
n
g
Computers
Symptom Cause Solution
You do not know if the OS
of your computer is
compatible. — p Check “Recommended computer environment” (page 51).
Your computer does not
recognize your camera. • The camera is turned off.
• The battery level is low.
• You are not using the supplied USB cable.
• The USB cable is not connected firmly.
• The USB connectors on your computer are
connected to other equipment besides the
keyboard, the mouse, and your camera.
• PIXELA PTP Manager is not installed.
• The camera was connected to a computer with
the USB cable before installing PIXELA PTP
Manager, so the device was not recognized by
the computer.
p Turn on the camera (page 17).
p Use the AC power adaptor or a fully charged battery back.
(page 16).
p Use the supplied USB cable.
p Disconnect the USB cable, and connect it again firmly. Make
sure that “USB MODE” is displayed on the LCD screen
(page 56).
p Disconnect the USB cables except for the ones connected to the
keyboard, the mouse, and your camera.
p Install PIXELA PTP Manager (page 52).
p Delete the device which is not recognized, then install PIXELA
PTP Manager (pages 52 and 60).
You cannot copy images. • The camera is not correctly connected to your
computer.
• You are not using the correct copy procedure for
your OS.
—
p Connect the camera and your computer correctly using the USB
cable (pages 52 and 56).
p Follow the designated copy procedure for your OS (page 51).
p If you are using the “PIXELA ImageMixer for Sony”
application software, click on HELP.
The image cannot be
played back on a
computer. —
—
p If you are using the “PIXELA ImageMixer for Sony”
application software, click on HELP.
p Consult the computer or software manufacturer.