Sony MVC-CD400 - Manual (Page 117)

model name1[MVC-CD400/CD250]
[3-075-356-12(1)]
filename[C:\MVC-CD400Nouhinn\3075356121\307535612MVCCD400U2\14add.fm]
masterpage:Right
117
A
d
d
iti
o
n
a
l in
fo
rm
at
io
n
[SETUP 1]
When [CONVERSION LENS] is set to [ON] (MVC-CD400 only):
•
The Scene Selection and Zoom functions are not available.
• When the mode dial is set to A or M, you can only select aperture values of F4 or higher.
• The focus preset is not available.
• Macro shooting is not available.
[SETUP 2]
Item Setting Description
FILE NUMBER x SERIES
RESET
– Assigns numbers to files in sequence even if the disc is changed.
– Resets the file numbering each time the disc is changed.
CONVERSION LENS
(MVC-CD400 only) ON / xOFF Sets to [ON] when using the VCL-MHG07 conversion lens (not supplied). At this time, the zoom
or the focus preset function does not work. Also, note that the VAD-S70 adaptor ring needed to
mount the conversion lens to your camera is not sold in some countries and regions.
HOT SHOE
(MVC-CD400 only) ON / xOFF Set when using a commercially available external flash.
/ LANGUAGE xENGLISH
/ JPN
– Displays the menu items, warnings and messages in English.
– Displays the menu items, warnings and messages in Japanese.
CONFIRM B. WRITE ON / xOFF Selects whether to confirm recording or deletion of the image before writing to the disk.
CLOCK SET OK / CANCEL Sets the date and time (page 17).
Item Setting Description
LCD BRIGHTNESS BRIGHT /
xNORMAL / DARK Selects the LCD brightness. This has no effect on the recorded images.
LCD BACKLIGHT BRIGHT /
x
NORMAL
Selects the brightness of the LCD backlight. Selecting [BRIGHT] makes the screen bright and
easy to see when using the camera outdoors or in other bright locations, but also uses up the
battery charge faster. Displayed only when using your camera with the battery pack.
BEEP SHUTTER
x
ON
OFF
– Turns on the shutter sound. (The shutter sound is heard when you press the shutter button.)
– Turns on the beep/shutter sound when you press the control button/shutter button.
– Turns off the beep/shutter sound.
VIDEO OUT x NTSC
PAL
– Sets the video output signal to NTSC mode (e.g., Japan, USA).
– Sets the video output signal to PAL mode (e.g., Europe).