Sony MVC-CD400 - Manual (Page 29)

model name1[MVC-CD400/CD250]
[3-075-356-12(1)]
filename[C:\MVC-CD400Nouhinn\3075356121\307535612MVCCD400U2\04bas.fm]
29
masterpage:Right2:1
S
hoot
in
g s
till i
m
ag
es
Using the self-timer
, Turn the mode dial to , and
press V ( ) on the control
button.
The (self-timer) indicator appears on the
LCD screen.
• If the menu is currently displayed, press MENU
first so that the menu disappears.
• You can also carry out this operation when the
mode dial is set to S*, A*, M*, SCN, or
.
* MVC-CD400 only
, Center the subject in the frame,
and press the shutter button
fully down.
The self-timer lamp (page 11) flashes and a
beep sounds after you press the shutter
button until the shutter button is released
(approximately 10 seconds).
To cancel the self-timer in the middle
of the operation
Press V ( ) on the control button again.
• If you press the shutter button while standing in
front of the camera, the focus and the exposure
may not be correctly set.
1
640
4
60min
2
640
F 5 . 6
3
0EV
5 0
60min
Selecting a flash mode
, Set the mode dial to , and
press v ( ) on the control
button repeatedly to select a
flash mode.
Each time you press v ( ), the indicator
changes as follows.
No indicator (Auto): The flash
automatically pops up and strobes when the
surroundings are dark (default).
r
(Forced flash): The flash strobes
regardless of the surrounding brightness.
r
(No flash): The flash does not strobe.
640
4
60min