Using the remote control – Sony WEGA KV-27FS100 User Manual

Page 11

Advertising
background image

Introduction

3

Using the Remote Control

The remote control shown (RM-Y181) is for the models KV-27FS200, KV-32FS200 and KV-36FS200.
The remote control for the models KV-27FS100, KV-32FS100, KV-36FS100 (RM-Y180); do not have
the yellow labeled PIP function buttons.

Button

Description

1

MUTING

Press to turn off the sound. Press again or press

to

restore sound.

2

SYSTEM OFF

Press to power off the equipment programmed into the
remote control, see “Programming the Remote Control”
on page 39.

3

TV/VCR

Press to switch between TV and VCR mode. If you have
a non-Sony VCR, you will need to program the remote
control to recognize your VCR. For details, see
“Programming the Remote Control” on page 39.

4

ANT
(antenna)

Press to change from VHF/UHF input to the AUX input,
press again to switch back (KV-27FS200, KV-32FS200
and KV-36FS200 only)

.

5

PICTURE MODE

Press repeatedly to step through the available video
picture modes: Vivid, Standard, Movie and Sports. Also
available in the Video menu. See “Using the Video
Menu” on page 24 for details.

6

SLEEP

Press repeatedly until the TV displays the time in minutes
(15, 30, 45, 60, or 90) that you want the TV to remain on
before shutting off automatically. Cancel by pressing until
Sleep Off appears. While Sleep feature is set, press once to
view remaining time.

7

JUMP

Press to jump back and forth between two channels. The
TV alternates between the current channel and the last
channel that was selected.

8

TV/SAT

Press to switch between the TV and SAT (satellite) inputs
when in SAT FUNCTION mode.
Press for a direct selection of Effect settings (Surround,
Off), when the remote is in TV FUNCTION mode.
See “Using the Audio Menu” on page 25 for details.

9

RESET

Press to return to factory settings while in an
on-screen menu.

q;

VOL (volume)

Press (+) or (-) to adjust the volume.

qa

CODE SET

Use to program your remote control to operate connected
video equipment. See “Programming the Remote
Control” on page 39.

/

A

B

C

D

E

F

L

M

N

O
P

Q

G

H

I

J

K

R

S

T

U

V

Advertising
This manual is related to the following products: