Sony WEGA KV-27FS100 - Manual (Page 43)

Using the Menus
35
Using the Timer Menu
Current Time Set your TV to the current day and time. Press to open Current Time menu:
1 Use the F or f buttons to enter the correct day and time, then press .
2 Press to exit the menu.
Timer 1 and
Timer 2
Scheduled
viewing Use the timers to program your TV to turn on and off by day, time, duration and
channel. The timers duration is maximum of 6 hours. When the channel is fixed,
it is not necessary to set the channel.
1
Use the F or f buttons to select Timer 1 or Timer 2, then press .
2 Use the F or f buttons to enter the desired day, start time, duration, and
channel, then press . The timer status should be On when the Timer
has been set, and the timer light on the front panel of the TV should be
turned on.
3 Press to exit the menu.
✍
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1 and Timer 2 settings will be cleared.
To access the Timer menu, refer to the following steps:
To Display To Highlight To Select
Timer 1 : Off
Timer 2 : Off
: AM
Video Audio Channel Parent Timer Setup Basic
Current Time
Program the time
Program
Move: Select: End:
✍
You must set the Current Time before you can use Timer 1 or Timer 2.
✍
Select Off to turn off the Timer (your previous settings will be saved).