Sony WEGA KV-27FS100 - Manual (Page 12)

4
Operating Instructions
qs POWER buttons Press to turn on and off the TV and other audio/video
equipment you have programmed into the remote
control. For instructions, see “Programming the Remote
Control” on page 39.
qd FUNCTION buttons Press to select the equipment (TV, VCR/DVD, SAT/
CABLE) that you want to operate with the remote
control. The indicator (LED) lights up momentarily
when pushed to show which device the remote control is
operating.
qf PIP (Picture in
Picture)
VCR (operating)
Operates PIP feature. See “Using Picture in Picture
(PIP)” on page 20.
Operates your VCR. The VCR must be programmed into
the remote control. For instructions, see “Programming
the Remote Control” on page 39.
REC Press button and the button - above left - at the
same time to record any programs with your VCR (the
remote control must be programmed in order to use
REC).
m Rewind.
M Fast-forward.
N Play.
x Stop.
X
Pause. Press again to resume normal playback.
qg TV/VIDEO Press to cycle through available video inputs.
qh DISPLAY Press once to display the current time and program status
(such as channel number, channel label (if set), video
input, and video label). Press again to turn display off.
qj MTS/SAP Press to cycle through the Multi-channel TV Sound
(MTS) options: Stereo, Auto SAP (Second Audio
Programming), and Mono.
qk and
ENTER
Press to change channels directly. The channel changes
after 2 seconds.
ql GUIDE Press to display the program guide of your satellite
antenna.
w; Press the arrow buttons to move the cursor in the
on-screen menus. Press the center button to select or
access an option.
wa MENU Press to display the on-screen menu. Press again to exit
the menu at any time.
ws CH (channel) Press to change channels. To scan rapidly through the
channels, press and hold down the CH+ or CH- button.
✍
For information on Picture in Picture (PIP) operation buttons, see page 21.
✍
If you lose your remote control, see page 44.
Button Description
0 9