Sony WEGA KV-27FS100 - Manual (Page 13)

5
Connecting Your TV
Read this section before setting up your TV for the first time. This section covers basic connections in
addition to any optional equipment you may be connecting.
TV Rear Panel
✍
The TV rear panels illustrated in this manual are for KV-27FS200, KV-32FS200 and KV-36FS200. The
KV-27FS100, KV-32FS100 and KV-36FS100; do not have the AUX input and TO CONVERTER output jack.
Jack Description
1AUX This input allows you to view local and cable channels if your cable
provider does not feature local channels. You can switch between local
and cable channels easily by pressing ANT on the remote control.
Devices connected to the AUX input cannot be viewed in PIP.
2TO CONVERTER This is a VHF/UHF out jack that lets you set up your TV to switch
between scrambled channels (through a cable box) and normal cable
channels (CATV). Use this jack instead of a splitter to get better
picture quality when you need to switch between scrambled and
unscrambled cable channels.
3 VHF/UHF This input connects to your VHF/UHF antenna or cable.
4 S VIDEO This input connects to the S VIDEO OUT jack on your VCR or other
video equipment that has S VIDEO. S VIDEO provides better picture
quality than the VHF/UHF jacks or the video input jack. S VIDEO
does not provide sound; you still must connect the audio cables.
1
2
3
4 5
AUDIO OUT
(VAR/FIX) 1 3 4
6 7