Using the channel setup menu – Sony WEGA KV-27FS100 User Manual
Page 35
Using the Menus
27
Using the Channel Setup
Menu
Favorite
Channels
Quick access
to favorite
channels
1
Use the
F
or
f
buttons
to select the position (1-8) where you want to set a
favorite channel, then press
.
2
Use the
F
or
f
buttons to find the channel you want to add to your favorite
channels.
3
Press
to select the channel. The TV will automatically change to the
selected channel.
4
Press
G
to return to the Channel Setup menu or press
to exit.
Cable
Use the
F
or
f
buttons to select from one of the following options, then press
to select it.
On:
Select if you are receiving cable channels with a CATV cable.
Off:
Select if you are using a TV antenna.
Channel Fix
Use the
F
or
f
buttons to select from one of the following options, then press
to select it.
Off:
Channel Fix is not set.
2-6:
Select when you want to control all channel selection through a cable
box or VCR. Select the appropriate channel (usually 3 or 4) and use
the cable box’s or VCR’s remote control for channel selection.
AUX 2-6:
Use this setting instead of the 2-6 if you want to change channels
using a cable box, VCR or satellite receiver and you’ve connected it
to the AUX input (KV-27FS200, KV-32FS200, KV-36FS200 only).
Video 1:
Select from available video inputs when you have connected video
equipment (e.g. satellite receiver) and you want your TV fixed to it.
To access the Channel Setup menu, refer to the following steps:
To Display
To Highlight
To Select
Press
f
to highlight an option then press
.
Favorite Channels
Cable :
On
Channel Fix:
Off
Auto Program
Channel Skip/Add
Channel Label
Video
Audio
Channel
Parent
Timer
Setup
Basic
Program
Program favorite
channels
Move:
Select:
End:
✍
To use Favorite Channels: Exit all menus and press
. Press
F
or
f
to move the cursor to the
desired channel number and press
.
✍
After changing your cable settings, you will need to perform Auto Program.