Sony WEGA KV-27FS100 - Manual (Page 16)

Operating Instructions
8
Cable Box Connections
Some cable TV systems use scrambled or encoded signals that require a cable box to view all channels.
If you subscribe to that kind of cable service, use this connection. Scrambled signals coming in to the
TV through the cable box cannot be viewed in PIP. If some of your channels are scrambled, consider
using the Cable Box and Cable connection.
Cable Box and TV
1 Connect the coaxial cable from your cable service to the IN jack on your cable box.
2 Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the VHF/UHF jack
on your TV.
✍
If you will be controlling all channel selection through your cable box, you should consider using the
Channel Fix feature to set your TV to channel 3 or 4 (see page 27).
1
2
Rear of TV
Cable Box
From Cable/
Antenna