Sony FIU-900 - Manual (Page 102)

Chapter 12: SecureSuite Program Maintenance
SecureSuite XS Workstation Guide 103
4. Click the Browse button to specify (or verify) the location of
the OEM files, which are necessary in order for your new
authentication device to work with SecureSuite.
•
If you received the device with SecureSuite, these files
were included with your installation software, and the
current search folder may be the correct location.
• If you received the device after SecureSuite was
installed, be sure to specify the directory under which
the OEM files are located.
5. Click Next to continue to the Custom Setup screen. In
the SecureSuite Components list, under
Authentication Methods , click the name of the device
that you want to install, and select This feature will
be installed on local hard drive . Click Next to
continue.
6. Click Install to begin the installation process. Once the
installation is finished, you will be informed that the
installation was successfully completed. Click
Next to
continue.
7. Restart your machine. When your system reboots, the
device will be available. You can add the device to user
accounts via the
SecureSuite User Manager , or
configure the device’s properties via the SecureSuite
System Settings dialog.
Note: If users will be using advanced authentication devices in order
to log on to a domain from their workstation and access domain
resources, the respective OEM device module must be installed on both
the client workstation and the domain server(s). Refer to the
SecureSuite XS Server Guide for more information.