Sony FIU-900 User Manual
Page 60
Chapter 8: SecureSuite System Settings
SecureSuite XS Workstation Guide
61
Managing Authentication Devices on Windows 2000 and XP Professional
Note: The following instructions assume that the OEM’s device module
was previously installed with SecureSuite. For information on
installing an OEM device module, refer to the Installing OEM Device
Modules section in Chapter 12 of this manual.
To add an authentication device to your system:
1. Since you have already installed the OEM device module,
the method will be listed in the left pane of the
System
Settings – Authentication Methods
dialog. Right-
click the method under which the device that you want to
add is categorized, and select
Add Device
from the menu
that appears. The
Add Authentication Device
dialog
appears, listing the installed authentication methods and
associated devices that SecureSuite has detected, but
which are currently not in use.
2. Select the authentication device you wish to add, and click
OK
. The authentication device you selected will now be
available in the right pane of the
System Settings –
Authentication Methods
dialog.
To view or change the settings for an installed device:
•
Right-click the device, and select
Properties
. (This is
not available for all devices.)
To remove a device from your system:
•
Right-click the device you wish to remove, and select
Remove Device
.
Important:
Please refer to the Sony® Puppy® installation guide (“Training Your
Puppy Unit”) included in your package or on the CD-ROM for specific instructions
on the installation and use of your fingerprint identity device.