Sony FIU-900 - Manual (Page 54)

Chapter 7: System Administration
SecureSuite XS Workstation Guide 55
7. Scan your fingerprint four times (the default number). The
first three times enroll your fingerprint, and the fourth
verifies that the fingerprints sufficiently match for later use in
the verification process. Click
Next .
8. Click Finish . The User Properties dialog appears.
•
Use the Add button to add an additional method of
authentication.
•
Use the Remove button to delete an enrolled method of
authentication.
9. If more than one method has been added, a method priority
icon will appear between each pair of devices in the
Current Methods and Devices list view in the
Authentication Methods tab of this user’s
Properties dialog. This icon specifies the relationship
between this user’s authentication devices. Right-click this
icon to choose one of the two following relationships:
•
Select AND to require the user to authenticate with all
enrolled methods of verification.
•
Select OR to allow the user to choose any one method
of verification each time they authenticate.
10. To specify a method that the user will be prompted to use
first when authenticating, select the method and use the
green method priority arrows on the right side of the
Authentication Methods tab of the User Properties
dialog to move the desired method to the top of the list.
This does not force the user to use this authentication
method or prevent them from using other methods.
11. Click OK when finished.