Sony FIU-900 - Manual (Page 53)

Chapter 7: System Administration
SecureSuite XS Workstation Guide 54
Adding Authentication Methods to a User Account
Note: During this and the following examples, the fingerprint
authentication method is used for illustration purposes only. Also,
this sample procedure assumes that a system administrator has
previously installed the fingerprint device with SecureSuite.
User License Keys
SecureSuite uses licenses to delegate how many users may employ
authentication methods other than the standard password method (which has no
user limit). SecureSuite includes one User License Key, which enables 5 users to
utilize non-password authentication methods. If there will be more than 5
advanced authentication method users on the system, you will need to add one or
more User License Keys via the
SecureSuite License Manager . For more
information on adding user licenses, refer to the SecureSuite License Manager
section in this manual.
Important: Please refer to the Sony® Puppy® installation guide (“Training Your
Puppy Unit”) included in your package or on the CD-ROM for specific instructions
on the installation and use of your fingerprint identity device.
To enroll a user with a fingerprint authentication device:
1. From the Start menu, select Programs , SecureSuite ,
and click SecureSuite User Manager .
2. Select the user account to which you wish to assign the
fingerprint authentication method. If you are working on
Windows 2000 or XP Professional, select
Properties
from the Action menu. For Windows XP Home, select
Properties from the User menu.
3. Type the user name and password of a SecureSuite
administrator when the SecureSuite Authentication
dialog appears. The User Properties dialog appears.
4. Select the Authentication Methods tab and click the
Add button. The Add Authentication Device dialog
appears.
5. Select the fingerprint method and associated fingerprint
device from the Available Methods and Devices list.
Click OK .
6. When the Fingerprint Enrollment Wizard appears,
click Next . Select a fingerprint to enroll by clicking its
image with your mouse, and click Next .