Asante Technologies FR3000 Series - Manual (Page 19)

User’s Manual 19
Chapter 4. Configuring DHCP for Windows
Computers
Your PC should have an installed network card to communicate with the net-
work.
Note: If you have previously enabled Microsoft Internet Sharing Proxy Service
(or other Internet sharing service) on any of your PCs, you must turn it off. From
the Windows desktop, check the Start | Settings | Control Panel | Internet Op-
tions | Connections tab | LAN Settings button. The proxy setting should be un-
checked.
4.1 Setting DHCP For Windows
Follow the steps below to configure your Win-
dows system for DHCP:
1.
Right click on the Network Neighborhood
icon (or my Neighborhood icon) and select
Properties.
2. Click Add to add network components into
your PC.
3. Double click on Protocol to add TCP/IP pro-
tocol.
4. Select Microsoft from the manufac-
turer list. Choose TCP/IP from the Net-
work Protocols. Click OK to return to
the Network window.
5. The TCP/IP protocol will be listed in
the Network window. Click OK to com-
plete the installation procedure and
restart your PC to enable the TCP/IP
protocol.
4.2 Configuring TCP/IP
Follow the steps below to configure TCP/IP on
your Windows computer:
1.
Right click on the Network Neighborhood
icon (or My Neighborhood icon) and select
Properties.