Asante Technologies FR3000 Series - Manual (Page 52)

52 Asanté FriendlyNET Cable/DSL Router
10.2 Installing Printer Drivers For Windows
To take advantage of the FriendlyNET FR3004LC or FR3002AL models’ print
server feature, you must install the special driver on each computer that will be
using the printer server. This feature is supported on Microsoft Windows 95/98/
Me and Windows NT/2000 Professional.
1.
Insert the FriendlyNET CD-ROM disk in your CD-ROM drive. Run the
SETUP.EXE file from the CD-ROM. Please wait until the Welcome dialog
box appears, and click on the Next button.
2. Select a destination folder or click Browse to choose another location.
3. Click Next. The setup program will begin installing all the programs into the
specified destination folder. When the setup program is completed, click
Finish.
4. When prompted, choose the option to re-start your computer and click OK.
Refer to the following sections for specific information on configuring the Print
Server function for Windows 95/98 and Windows NT/2000
C ONFIGURING P RINTER D RIVERS FOR W INDOWS 95/98 S YSTEMS
The printer connected to the Printer port on the FR3004LC/FR3002AL router is
referred to as a shared printer. On each computer sharing the printer, open the
Printers window in the My Computer menu. If the printer has not been installed,
click on the Add Printer icon to choose the appropriate printer and follow the on-
screen instructions.
Perform the following steps to configure the shared
printer:
1.
Locate the icon of your shared printer. For example,
the HP LaserJet 6L. Click the mouse’s right button
on that icon, and then select the Properties item.
2. Select the Details tab. Choose the PRT:
(FriendlyNET Print Server) from the drop down list.
Be sure that the printer driver item is configured to the correct driver for your
shared printer. Click on Port Settings.
3. Enter the LAN IP address of the router (Default 192.168.123.254), and then
click the OK button. Make sure that all settings mentioned above are cor-
rect, then click the OK button.