Asante Technologies FR3000 Series - Manual (Page 20)

20 Asanté FriendlyNET Cable/DSL Router
2. Click Properties to set the TCP/IP protocol.
3. In the IP Address tab, select Obtain an IP
address automatically in the IP Address tab.
4. Leave the Gateway tab blank.
5. In the DNS Configuration tab, choose Dis-
able DNS.
4.3 Manually Setting IP Addresses
Although DHCP is the recommended method for
setting IP addresses, you may need to manually set
addresses. To do so, follow these guidelines:
1.
Select Specify an IP address in the IP Address
tab. The default IP address of the router is
192.168.123.254. Use 192.168.123.xxx (where
xxx is the node number between 1 and 253) for
IP Address field and 255.255.255.0 for Subnet
Mask field. Make sure each client configured in
this fashion has a unique node number.
2. In the Gateway tab, add the IP address of the
router (default IP is 192.168.123.254) in the
New gateway field and click the Add button.
3. In the DNS Configuration tab, add the addresses (provided by your ISP)
into the DNS Server Search Order field and click Add.
Note: Keep your Windows CD handy; you may be asked for it at the end of the
installation. Remember to restart your computers after configuring TCP/IP set-
tings.
The configuration of TCP/IP for Windows is now complete.