Asante Technologies FR3000 Series - Manual (Page 21)

User’s Manual 21
Chapter 5. Setup Screen
This chapter describes how to configure the router for your local area network
(LAN) and Internet (WAN) connections. You may use a computer connected to
any of the router’s LAN ports.
5.1 Configuring Your Router Using the Setup Screen
1.
Start your web browser. Type http://192.168.123.254 into your browser’s
address or location field and press Enter.
Note: If you are unable to connect to the router, disable your browser’s
proxy setting or
add the IP address
(default:
192.168.123.254)
of the router to the
exceptions.
2. In a few moments
you’ll see the Login screen for the router. Enter admin (the default pass-
word) and click the Login button.
Note: The factory default password is admin and is case sensitive. It should
be changed to
prevent unauthor-
ized logins. See
section 7.1
(Change Admin-
istrator’s Password) for more information.
3. From the menu bar on the top of the screen, click on Setup.
4. From the WAN Type screen,
select the type that best de-
scribes your Internet connec-
tion. Sections 5.2 thru 5.10 de-
scribe the WAN types more
fully.
Tip: If you are unsure about
your WAN type, please check
with your ISP. If that’s not possi-
ble, then consult the following
table for suggestions. Please
note that this is not a complete
list. Some ISPs may offer ser-
vices for multiple WAN types.
5. Click the Next button .