Sony ILCA-77M2 - Manual (Page 102)

exposure levels; −1.0 EV, optimal exposure and +1.0 EV.
Note
[Auto HDR] is not available for RAW images.
When the shooting mode is set to [Intelligent Auto], [Superior Auto], [Sweep Panorama], [Cont. Priority
AE] or [Scene Selection], you cannot select [Auto HDR].
When [Multi Frame NR] is selected, you cannot select [Auto HDR].
When using [Picture Effect], you cannot select [Auto HDR].
You cannot start the next shot until the capture process is completed after you shoot.
You may not obtain the desired effect depending on the luminance difference of a subject and the
shooting conditions.
When the flash is used, this function has little effect.
When the contrast of the scene is low or when product shake or subject blur occurs, you may not
obtain good HDR images. If the product has detected a problem, is displayed on the
recorded image to inform you of this situation. Shoot again as necessary, paying attention to the
contrast or blur.
[118] How to Use Using shooting functions Adjusting color tones
White Balance
Adjusts the color tones according to the ambient light conditions. Use this feature when the color tones
of the image did not come out as you expected, or when you want to change the color tones on purpose
for photographic expression.
1. MENU
→
(Camera Settings
) → [White Balance] → desired setting.
You can also set the white balance by pressing the WB (White Balance) button.
Menu item details
Auto (default setting):
The product automatically detects the light source and adjusts the color tones.
Daylight:
The color tones are adjusted for the daylight.
Shade:
The color tones are adjusted for shadiness.
Cloudy:
The color temperature is adjusted for a cloudy sky.
Incandescent:
The color temperature is adjusted for places under an incandescent lamp, or under bright lighting, such
as in a photo studio.
Fluor.: Warm White:
The color temperature is adjusted for warm white fluorescent lighting.