Number of still images [261, On cleaning, Number of still images – Sony ILCA-77M2 User Manual

Page 183: Cleaning the lens and flash, Cleaning the lens, Cleaning the flash, Cleaning the camera body, Cleaning the product surface, Cleaning the monitor

Advertising
background image

[260] How to Use

Precautions/This product

Cleaning this product

On cleaning

Cleaning the lens and flash

Wipe the lens and flash with a soft cloth to remove fingerprints, dust, etc.

Cleaning the lens

Do not use a cleaning solution containing organic solvents, such as thinner, or benzine.

When cleaning the lens surface, remove dust with a commercially available blower. In case of dust

that sticks to the surface, wipe it off with a soft cloth or tissue paper slightly moistened with lens

cleaning solution. Wipe in a spiral pattern from the center to the outside. Do not spray lens cleaning

solution directly onto the lens surface.

Cleaning the flash

Clean the flash surface before use. The heat of the flash emission may cause dirt on the flash surface to

start smoking or burning. Wipe the flash surface with a soft cloth to remove dirt or dust, etc.

Cleaning the camera body

Do not touch the parts of the product inside the lens mount, such as a lens signal contact. To clean

inside the lens mount, use a commercially available blower* to blow any dust off.

*

Do not use a spray-type blower as doing so may cause a malfunction.

Cleaning the product surface

Clean the product surface with a soft cloth slightly moistened with water, then wipe the surface with a dry

cloth. To prevent damage to the finish or casing:

Do not expose the product to chemical products such as thinner, benzine, alcohol, disposable cloths,

insect repellent, sunscreen or insecticide.

Do not touch the product with any of the above on your hand.

Do not leave the product in contact with rubber or vinyl for a long time.

Cleaning the monitor

If oil from your hand or hand cream, etc., remain on the monitor, the original coating may become

easily removable. Wipe oil or hand cream off as soon as possible.

If you wipe the monitor firmly using tissue paper, etc., the coating may be scratched.

If the monitor becomes dirty with fingerprints or dust, gently remove the dust from the surface, and

then clean the monitor using soft cloth, etc.

[261] How to Use

Precautions/This product

Number of recordable still images and

recordable time of movies

Number of still images

Advertising