Deactivate monitor [171, Aperture preview [172, Shot. result preview [173 – Sony ILCA-77M2 User Manual
Page 131: Deactivate monitor, Aperture preview, Shot. result preview
Hint
You can release the locked dial by holding the Fn (Function) button down.
[171] How to Use
Using shooting functions
Setting the other functions of this product
Deactivate Monitor
When you press the key to which the [Deactivate Monitor] function is assigned, [Live View Display] is
switched to [Setting Effect OFF], and the screen display is switched to [No Disp. Info.].
1. MENU
→
(Custom Settings
) → [Custom Key Settings] → set the [Deactivate Monitor] function
to the desired key.
2. Press the key to which [Deactivate Monitor] was assigned.
Note
Even if you perform [Deactivate Monitor], the backlight of monitor remains on. To turn off the backlight
of monitor, press the FINDER/MONITOR button.
[172] How to Use
Using shooting functions
Setting the other functions of this product
Aperture Preview
With the monitor or viewfinder, you may see an image with an aperture that differs from the shooting
result. Since the blurring of a subject changes if the aperture is changed, the blurriness of the actual
picture will differ from the image you were viewing prior to shooting.
While you press and hold the key to which you assigned the [Aperture Preview] function, the aperture is
stepped down to the set aperture value and you can check the blurriness prior to shooting.
1. MENU
→
(Custom Settings
) → [Custom Key Settings] → set the [Aperture Preview] function to
the desired key.
2. Confirm the image by pressing the key to which [Aperture Preview] was assigned.
[173] How to Use
Using shooting functions
Setting the other functions of this product
Shot. Result Preview