Sony ILCA-77M2 - Manual (Page 203)

memory card is erased. It may take some time to complete the format. If the message still appears,
change the memory card.
Memory Card Error
An incompatible memory card is inserted.
Formatting has failed. Format the memory card again.
Unable to read memory card. Reinsert memory card.
An incompatible memory card is inserted.
The memory card is damaged.
The terminal section of the memory card is dirty.
This memory card may not be capable of recording and playing normally.
An incompatible memory card is inserted.
Processing...
When performing noise reduction, the reduction process takes place. You cannot do any further
shooting during this reduction process.
Unable to display.
Images recorded with other products or images modified with a computer may not be displayed.
Cannot recognize lens. Attach it properly.
The lens is not attached properly, or the lens is not attached. If the message appears when a lens is
attached, reattach the lens. If the message appears frequently, check whether the contacts of the lens
and product are clean or not.
When attaching the product to an astronomical telescope or something similar, set [Release w/o Lens]
to [Enable].
Unable to print.
You tried to mark RAW images with a DPOF mark.
Internal temp. high. Allow it to cool.
The product has become hot because you have been shooting continuously. Turn the power off. Cool
the product and wait until the product is ready to shoot again.
You have been recording images for a long time, the product temperature has risen. Stop recording
images until the product cools.
Recording is unavailable in this movie format.
Set [ File Format] to [MP4].
The number of images exceeds that for which date management in a database file by the product is
possible.
Unable to register to the database file. Import all the images to a computer and recover the memory
card.