Aperture priority [42, Aperture priority – Sony ILCA-77M2 User Manual

Page 55

Advertising
background image

You can express the movement of a moving subject in various ways by adjusting the shutter speed, for

example, at the instant of the movement with high speed shutter, or as a trailing image with low speed

shutter. The shutter speed can be changed while recording movies.

1. Set the mode dial to S (Shutter Priority).

2. Select the desired value by turning the front dial.

3. Adjust the focus and shoot the subject.

The aperture is automatically adjusted to obtain proper exposure.

Note

If proper exposure cannot be obtained after setup, the aperture value on the shooting screen blinks.

Although you can shoot as it is, resetting is recommended.

Use a tripod to prevent blurring when you use a slow shutter speed.

The

(SteadyShot warning) indicator does not appear in shutter speed priority mode.

When the shutter speed is 1 second(s) or longer, noise reduction will be done after shooting for the

same amount of time that the shutter was open. However, you cannot shoot any more while noise

reduction is in progress.

The brightness of the image on the monitor may differ from the actual image being shot.

Hint

When a faster shutter speed is used, moving subjects, such as a running person, cars, or sea spray

come out as if they are frozen in their movements. When a slower shutter speed is used, a trailing

image of the movement of the subject is captured to create a more natural and dynamic image.

[42] How to Use

Shooting

Selecting a shooting mode

Aperture Priority

You can shoot by adjusting the aperture and changing the range in focus, or by defocusing the

background. The aperture value can be changed while recording movies.

1. Set the mode dial to A (Aperture Priority).

2. Select the desired value by turning the front dial.

Smaller F-value: The subject is in focus, but objects in front of and beyond the subject are

blurred.

Larger F-value: The subject and its foreground and background are all in focus.

3. Adjust the focus and shoot the subject.

The shutter speed is automatically adjusted to obtain proper exposure.

Note

Advertising