Recommendations on installation – Sony FWD-32LX2F User Manual
Page 46
6
GB
Recommendations on
Installation
Provide an ample amount of space around
the display
• To prevent internal heat buildup from sealing off the
display, make sure to ensure proper ventilation by leaving
open the minimum amount of space around the display, as
illustrated below.
• The ambient temperature must be 0
°C
to 35
°C
(32
°F
to
95
°F
).
• When using the stand, make sure you use the applicable
display stand SU-42FW/32FW (not supplied).
• Regarding the installation of hardware such as brackets,
screws, or bolts, we cannot specify the products. Actual
installation is up to the authorized local dealers. Consult
with qualified Sony personnel for installation.
• While the display is on, a certain amount of heat builds up
inside. This can cause burns. Avoid touching the top or
rear of the display when it is powered on or just after it has
entered standby mode.
When using the display stand
When mounting the display horizontally
When mounting the display vertically
• When mounting the display vertically, you cannot use the
speakers SS-SP40FW/32FW (not supplied).
• Be sure to use only the UL listed wall mount bracket to
mount the display.
Front
Side
Units: cm (inches)
20 (7
7
/
8
)
10
(4
)
10
(4
)
10 (4
)
Notes
Front
Side
Units: cm (inches)
25 (9
7
/
8
)
10
(4
)
10
(4
)
25 (9
7
/
8
)
5 (2
)
Front
Side
Make sure
that the
1 POWER
switch is at
the lower
right.
20 (7
7
/
8
)
25
(9
7
/
8
)
25
(9
7
/
8
)
10 (4
)
Units: cm (inches)
5 (2
)