Using the pap setting – Sony FWD-32LX2F User Manual
Page 55
15
GB
GB
Using the PAP Setting
You can show two pictures from different signal
sources, such as a PC and a video, side by side.
You can also swap the left/right pictures, or change
the balance of left/right picture sizes.
Tip
You can also access the “PAP Setting” in the “Screen”
settings. See page 26.
The width of A and B is the
same.
The height will be set to
match each picture’s
aspect ratio.
Press
g button.
The width of B is larger
than that of A.
If B’s aspect ratio is 4:3,
its height will be equal to
the panel size.
The width of A and B is
the same.
The height will be set to
match each picture’s
aspect ratio.
Press
G button.
The width of A is larger
than that of B.
If A’s aspect ratio is
4:3, its height will be
equal to the panel size.
Press
g button.
B on the right side
becomes the active
picture.
Cursor showing active picture
Press
g button.
Available combination of two pictures
HD15
HDMI 1
HDMI 2
OPTION 1 & 2
RGB
Component
HDMI/
DVI
HDMI/
DVI
RGB
Component
Video
S Video
HD15
RGB
a
a
Component
a
a
HDMI 1
HDMI/DVI
a
a
a
a
a
a
HDMI 2
HDMI/DVI
a
a
a
a
a
a
OPTION
1 & 2
RGB
a
a
Component
a
a
Video
a
a
S Video
a
a