Sound settings, Sound mode, Sound mode reset – Sony FWD-32LX2F User Manual
Page 64: Treble, Bass, Balance, Common audio sel, Speaker out
24
GB
Sound Settings
Tip
You can adjust the sound quality menus (“Treble” and “Bass”) when the “Sound Mode” is set to “Custom”.
When the speakers SS-SP40FW/32FW (not supplied)
are installed, you can set various “Sound” settings.
To highlight an option and to change settings, press
F
/
f
/
G
/
g
.
Press
to confirm the selection.
The “Sound” settings include the following options:
Sound Mode
“Dynamic”: Select to enhance treble and bass.
“Standard”: Flat setting.
“SRS WOW”: Provides a panoramic stereo audio image by producing deep and rich
bass tones and clear treble tones, enabling you to enjoy powerful sound effects like
those in a movie theater.
“Custom”: Allows you to store preferred settings.
Tips
• To change from one “Sound Mode” option to another, you can also use SOUND on the
remote control instead.
• The proprietary technologies of BBE Sound, Inc. are applied for “Dynamic” and “Standard”.
Sound Mode Reset
Resets the following settings; “Treble”, “Bass” and “Balance” to the default settings.
Treble
Adjust to increase or decrease higher-pitched sounds.
Bass
Adjust to increase or decrease lower-pitched sounds.
Balance
Adjust to emphasize left or right speaker balance.
Common Audio Sel.
“HD15”: Outputs audio from a piece of video equipment or PC connected to the
HD15 (RGB/COMPONENT IN) connector and the AUDIO (COMMON AUDIO
IN) connector.
“HDMI 1”/“HDMI 2”: Select to connect a piece of equipment using an HDMI cable
(not supplied) or an HDMI-to-DVI cable, and the corresponding audio cable at the
same time.
See page 8.
• When using an HDMI-to-DVI cable (not supplied), connect the audio cable to the AUDIO
(COMMON AUDIO IN) connector.
• When “HDMI 1”/“HDMI 2” is selected, digital audio is not output from the HDMI
connectors. When a piece of video equipment equipped with an HDMI connector is
connected to the HDMI 1/HDMI 2 connectors, set “Common Audio Sel.” to “HD15”.
(The default setting is “HD15”.)
Speaker Out
“On”: Enables sound to be emitted from the speakers.
“Off”: Disables sound to be emitted from the speakers.
When “Speaker Out” is set to “Off”, “Sound Mode”, “Sound Mode Reset”, “Treble”, “Bass”,
and “Balance” cannot be selected.
Sound
:
Exit:
Back:
:
MENU
HDMI 1
Sel
Set
Sound Mode :
Dynamic
Sound Mode Reset
Treble :
Bass :
Balance :
Center
Common Audio Sel. : HD15
Speaker Out :
On
Dynamic
Standard
SRS WOW
Custom
Notes
Note