True color control, Picture mode, Picture mode reset – Sony FWD-32LX2F User Manual
Page 63: Picture, Brightness, Color temp, For pc input
23
GB
GB
Tip
You can alter the “Picture” settings (“Picture”, “Brightness”, “Color”, etc.) for each “Picture Mode”.
• In the “
PAP
” mode, none of the options of the “Picture” settings can be selected.
• If there is no signal currently being input, none of the options of the “Picture” setting can be selected.
For PC Input
• “Color”, “Hue”, “Sharpness”, “Noise Reduction” and “CineMotion” are not available for PC input.
• In the “PAP” mode, none of the “Picture” settings options can be selected.
• If there is no signal currently being input, none of the options of the “Picture” setting can be selected.
True Color Control
You can adjust the details of hue and saturation for each of 4 colors : red, green,
yellow, blue, and you can highlight specific colors in the image.
Select the color which you want to adjust, and you can check and see which part of
current image will be adjusted. Then you can adjust it using the matrix dialog.
• This option can be adjusted when “Picture Mode” is set to “TC Control”.
• In “PAP” mode, you cannot select this option. Even if you select this option in the single-
picture screen, the setting of this option may not be applied in the “PAP” mode.
Notes
When input is switched to a PC input source, the
“Picture” settings specific to PC input are applied.
The “Picture” settings for a PC include the following
options:
Picture Mode
“Vivid”: Select for enhanced picture contrast and sharpness.
“Standard”: Select for standard picture settings.
“Custom”: Allows you to store preferred settings.
“TC Control”: The setting is common with “Vivid”. In addition, you can use the
“True Color Control” function (after-mentioned).
Picture Mode Reset
Resets all settings and adjustments to the default setting for the currently selected
“Picture Mode” (“Vivid”, “Standard”, “Custom”, “TC Control”) (except for the
options grayed out).
Picture
Adjust to increase or decrease picture contrast.
Brightness
Adjust to brighten or darken the picture.
Color Temp.
See “Color Temp.” for video input (page 22).
True Color Control
See “True Color Control” for video input (page 23).
Notes
Notes
Picture
HD15 RGB
Sel:
Exit:
Back:
Set:
MENU
Picture Mode :
Vivid
Picture Mode Reset
Picture :
50
Brightness :
40
Color :
Hue :
Color Temp. :
Neutral
Sharpness :
Noise Reduction :
CineMotion :
True Color Control :