Sony FWD-32LX2F - Manual (Page 52)

12 GB
Remote Control
Button Description
• The 5 button and button have a tactile dot. Use the tactile dot as a reference when operating the display.
• Insert two size AA (R6) batteries (supplied) by matching the 3 and # on the batteries to the diagram inside the remote control’s
battery compartment.
1 POWER ON switch
Press to turn the display on.
2 HDMI 1/ HDMI 2 button
Press to select the signal input to the HDMI 1 or HDMI 2 connectors.
3 button
Press to change the aspect ratio in “Wide Mode”. See page 14.
4 button
Selects the “PAP” (Picture And Picture) mode. Each press toggles
between the two-picture screen and the single-picture screen. See
page 15.
5 PICTURE button
Selects “Picture Mode”. Each press toggles between “Vivid”,
“Standard”, “Custom”, and “TC Control”.
6 F/f/G/g/ buttons
The F/f/G/g buttons move the menu cursor (yellow) and set values,
etc. Pressing sets the selected menu or setting items.
In the “PAP” mode, you can switch the active picture with G/g .
7 SOUND button
Selects “Sound Mode”. Each press toggles between “Dynamic”,
“Standard”, “SRS WOW”, and “Custom”.
8 MENU button
Press to show menus. Press again to hide them. See page 20.
HDMI2 HDMI2
ON ON STANDBY STANDBY
HD15 HD15
ON ON ID MODE ID MODE OFF OFF
SET SET
OPTION1 OPTION1
DISPLAY DISPLAY
ECO ECO SOUND SOUND
PICTURE PICTURE
OPTION2 OPTION2
HDMI1 HDMI1
RM-FW001 RM-FW001
Notes
,
Push and slide to open