Sony FWD-32LX2F - Manual (Page 62)

22 GB
Picture Settings
For Video Input
To highlight an option and to change settings, press
F
/
f
/
G
/
g
.
Press to confirm the selection.
The “Picture” settings include the following options:
Picture Mode “Vivid”: Select for enhanced picture contrast and sharpness.
“Standard”: Select for standard picture settings.
“Custom”: Allows you to store preferred settings.
“TC Control”: The setting is common with “Vivid”. In addition, you can use the
“True Color Control” function (after-mentioned).
Tips
• To change from one “Picture Mode” option to another, you can also use PICTURE on the
remote control instead.
• You can alter the “Picture Mode” options for each input.
Picture Mode Reset Resets all settings and adjustments to the default setting for the currently selected
“Picture Mode” (“Vivid”, “Standard”, “Custom”, “TC Control”) (except for the
options grayed out).
Picture Adjust picture contrast.
Brightness Adjust to brighten or darken the picture.
Color Adjust to increase or decrease color intensity.
Hue Adjusts the color tones of the picture.
“Hue” is not available when the input is video or S Video and the color system of video signal
is not NTSC.
Color Temp. “Cool”: Select to give the white colors a blue tint.
“Neutral”: Select to give the white colors a neutral tint.
“Warm”: Select to give the white colors a red tint.
Sharpness Adjust to sharpen or soften the picture.
Noise Reduction Select to reduce the noise level of connected equipment. Select from “On” or “Off”.
CineMotion Select “Auto” to optimize the screen display automatically detecting film content
and applying a reverse 3-2 pull down or 2-2 pull down process. Moving picture will
appear clearer and more natural looking. Select “Off” to disable the detection.
Sel: Exit: Back: Set: MENU
HDMI 1 Picture
Picture Mode : Vivid
Picture Mode Reset
Picture :
Max
Brightness : 40
Color : 60
Hue : 0
Color Temp. : Cool
Sharpness : 18
Noise Reduction : On
CineMotion :
True Color Control
Auto
Vivid
Standard
Custom
TC Control
Note