AVerMedia Technologies AverEPack300 - Manual (Page 28)

AVerMedia ® AVerEPack300 User’s Manual
24
SHARPNESS : Press the RIGHT button to increase and the LEFT
button to decrease the sharpness level. There are three
(3) brightness levels to choose from.
BRIGHTNESS : Press the RIGHT button to increase and the LEFT
button to decrease the brightness level. There are
four (4) brightness levels to choose from.
SLIDE DELAY : Presets the period of time to display the slide before it
loads the next slide. This function works during slide
show. The time value settings in seconds
are as follows:
3~10, 15, 20, 25, 30, 45, 60, 120, 180 and 300.
TRANSITION : Press the LEFT or RIGHT button to select the preferred
transition effect.
Transition Effects:
The image transition will appear from the bottom
to top.
The image transition will appear from the top to
bottom.
The image transition will appear from the right to
left.
The image transition will appear from the left to
right.
The image transition will appear from the center
to all sides.
LOADING : Turns the loading indicator function on and off. When the
loading indicator is off, the symbol will not show up when the
system is loading a slide.
STATUS : Indicates which modes you are currently using.
• TV SYSTEM: indicates whether your TV is “NTSC” or “PAL”.
• VGA: indicates the resolution of the displayed slide.
INDICATOR