AVerMedia Technologies AverEPack300 - Manual (Page 9)

5
Chapter 2
Hardware Installation and
Setup
Connection Ports
The Ports on B, C, and D side panel of
the AVerEPack300 are for connecting
the unit to the PC’s parallel port or
USB port, graphics display monitor,
TV and other devices.
This section briefly describes what devices should go into each port. For proper
cable connections and installation, please read the rest of this chapter. (Text
describing each port are printed at the bottom side of the device.)
Port Description Port Description
POWER Plug the AC Power
Adapter to this port. VIDEO This port allows you to
output the slide image
to a TV monitor which
uses a composite video.
PRINTER This port allows you
to import and export
slide presentation to
and from your PC and
Compact Flash
Memory.
S-VIDEO This port allows you to
output the slide image
to a TV monitor which
uses S-Video.
USB This port allows you
to import and export
slide presentation to
and from your PC and
Compact Flash
Memory. SCART/
VGA
This port allows you to
output the slide image
to a VGA monitor,
LCD projector or TV
Monitor which uses
SCART RGB
D
C
B
A
Panel Directions