To adjust the exposure for backlit subjects, To record in mirror mode, To use a tripod – Sony DCR-HC90 User Manual

Page 25: Playback, To play back the images in sequence, To use pb zoom

Advertising
background image

25

DCR-HC90 2-548-307-11(1)

Recording/Playback

feet).

• Remove any dust from the surface of the flash

lamp before using it. Flash effect may be
impaired if heat discoloration or dust obscures
the lamp.

• The flash charge lamp flickers when charging

the flash, and remains lit when the battery
charge is complete. (In the CAMERA-TAPE
mode, it takes a while to fully charge the flash
lamp since it charges its battery with the flash
lamp open.)

• If you use the flash in bright places such as

when shooting a backlit subject, the flash may
not be effective.

• Attaching a conversion lens (optional) may

create a shadow.

• You can change the brightness of the flash by

setting [FLASH LEVEL], or you can prevent
the redeye by setting [REDEYE REDUC], in
[FLASH SET] (p. 43).

To adjust the exposure for backlit

subjects ................................

To adjust the exposure for backlit subjects,
press BACK LIGHT

 to display . To

cancel the back light function, press BACK
LIGHT again.

To adjust the focus for an off center

subject (SPOT FOCUS) ..............

See [SPOT FOCUS] on page 42.

To fix the exposure for the selected

subject (Flexible spot meter) ......

See [SPOT METER] on page 40.

To record in mirror mode ............

Open the LCD panel

 90 degrees to the

camcorder (

), then rotate it 180 degrees

to the lens side (

).

• A mirror-image of the subject appears on the

LCD screen, but the picture will be normal
when recorded.

To use a tripod ........................

Attach the tripod (optional: the length of
the screw must be less than 5.5 mm (7/32
in.) to the tripod receptacle

 using a

tripod screw.

Playback

To play back the images in sequence

...........................................

See [SLIDE SHOW] on page 48.

To use PB zoom ..................  

You can magnify pictures from about 1.1 to
5 times the original size.
Magnification can be adjusted with the
power zoom lever

 or the zoom buttons

 on the LCD frame.

Play back the picture you want to

magnify.

Magnify the picture with T (Telephoto).

Touch the screen at the point you want

to magnify within the displayed frame.

Adjust the magnification with W (Wide

angle)/T (Telephoto).

To cancel, touch [END].

• You cannot change the zoom speed with the

zoom buttons

 on the LCD frame.

Continued

Advertising