Sony DCR-HC90 - Manual (Page 61)

61
Dubbing/Editing
DCR-HC90 2-548-307-11(1)
Dubbing to another device
such as a VCR, DVD
recorder, etc.
You can copy the picture played back on
your camcorder to other recording devices
(such as VCRs).
1
Connect your VCR to your
camcorder as a recording device.
See page 60 for connection details.
2
Prepare your VCR for recording.
When dubbing to the VCR, insert a
cassette for recording.
When dubbing to the DVD recorder,
insert a DVD for recording.
If your recording device has an input
selector, set it to the appropriate input
(such as video 1, video 2, etc.).
3
Prepare your camcorder for
playback.
Insert the recorded cassette.
Set [TV TYPE] according to the
playback device (TV, etc.) (p. 34).
4
Start the playback on your
camcorder, and record it on the
VCR.
Refer to the operating instructions
supplied with your recording device for
details.
5
When the dubbing is finished,
stop your camcorder and the
VCR.
• The following cannot be output via the DV
interface:
– Indicators
– [PICT. EFFECT] (p. 50), [D. EFFECT] (p.
49) or PB zoom (p. 25).
– Titles that are recorded on other camcorder.
• To record date/time and camera settings data
when connected by the A/V connecting cable
(supplied), display them on the screen (p. 56).
• When connected using an i.LINK cable
(optional), the recorded picture becomes rough
when a picture is paused on your camcorder
while recording to a VCR.
• Data code (date/time/camera settings data) may
not be displayed depending on the application
used on the playback device.