Sony DCR-HC90 - Manual (Page 56)

56
DCR-HC90 2-548-307-11(1)
DISP GUIDE
See page 15.
GUIDEFRAME
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON]. The
frame is not recorded. Press DISP/BATT
INFO to make the frame disappear.
DATA CODE
Displays information recorded
automatically (data code) during recording.
 OFF
Data code is not displayed.
DATE/TIME
Displays the date and time.
CAMERA DATA (below)
Displays camera setting data.
This cannot be selected during Easy
Handycam operation.
0:00:00:00 60min
AWB 100
9dB F1. 8
AUTO
1
2
3
4
5
6
 SteadyShot off *
 Exposure *
 White balance *
 Gain *
 Shutter speed
 Aperture value
* Appears only during tape playback.
• Camera setting data does not appear when
movies on a “Memory Stick Duo” are played
back.
• The exposure adjustment value (0EV), a shutter
speed, and the aperture value appear when still
images on a “Memory Stick Duo” are played
back.
• appears for a picture recorded using a flash.
• In the DATE/TIME data display, the date and
time are displayed in the same area. If you
record a picture without setting the clock, [--- --
----] and [--:--:--] will appear.
REMAINING
 AUTO
Displays the remaining tape indicator for
about 8 seconds in situations such as those
described below.
• When you set the POWER switch to PLAY/
EDIT or CAMERA-TAPE with a cassette
inserted.
• When you touch (Play/Pause).
ON
Always displays the remaining tape
indicator.
REMOTE CTRL (Remote control)
The default setting is [ON], allowing you to
use the Remote Commander (p. 32).
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
• The setting returns to [ON] when you have
the power source disconnected from your
camcorder for more than 5 minutes.
REC LAMP (Recording lamp)
The camera recording lamp will not light
up during recording when you set this to
[OFF]. (The default setting is [ON].)
BEEP
 ON
A melody sounds when you start/stop
recording, or operate the touch panel.
OFF
Cancels the melody.
STANDARD SET menu (continued)