Sony DCR-HC90 - Manual (Page 26)

26
DCR-HC90 2-548-307-11(1)
qa
qs
qf
qd
7
qh
qg
Recording/playback
To check the remaining battery
(Battery Info) .......................... 
Set the POWER switch up to OFF (CHG),
then press DISP/BATT INFO
. The
battery information appears for about 7
seconds. Keep the button pressed to view it
for about 20 seconds.
Remaining battery (approx.)
Recording capacity (approx.)
To turn off the operation confirmation
beep .................................... 
See [BEEP] (p. 56) to set the operation
beep.
To use special effects ................ 
See (PICT.APPLI.) menu (p. 48).
To initialize the settings ............. 
Press RESET  to initialize all the
settings, including the setting of the date
and time.
(Menu items customized on Personal Menu
are not initialized.)
Other part names and functions
 Speaker
Sounds come out from the speaker.
• For how to adjust the volume, see page 23.
 REC lamp
The REC lamp lights up in red during
recording (p. 56).
 Remote sensor
Point the Remote Commander (p. 32)
towards the remote sensor to operate
your camcorder.
 Internal stereo microphone
When an external microphone is
connected, the audio input from the
external microphone takes precedence
over others.
Functions used for recording/playback, etc. (continued)