Sony DCR-HC90 - Manual (Page 75)

75
Using a Computer
DCR-HC90 2-548-307-11(1)
14
Make sure [Yes, I want to restart
my computer now.] is checked,
then click [Finish].
The computer turns off once, then starts
up again automatically (Restart). The
short-cut icons for [Picture Package
Menu] and [Picture Package Menu
destination Folder] (and “First Step
Guide”, if installed by steps 11-12)
appear on the desktop.
15
Remove the CD-ROM from the
disc drive of your computer.
• If you have any questions about Picture
Package, contact information is listed on page
76.
Installing on a Macintosh
computer
1
Confirm that your camcorder is
not connected to the computer.
2
Turn on the computer.
Close all applications running on the
computer before installing the software.
3
Place the CD-ROM in the disc
drive of your computer.
4
Double-click CD-ROM icon.
5
Copy “FirstStepGuide.pdf,” stored
in the desired language in the
[FirstStepGuide] folder, to your
computer.
6
Then, install ImageMixer VCD2.
7
Copy [IMXINST.SIT] in the [MAC]
folder of the CD-ROM to a folder
of your choice.
8
Double-click [IMXINST.SIT] in the
folder it was copied to.
9
Double-click the unzipped
[ImageMixerVCD2_Install].
10
When the user acceptance
screen is displayed, enter your
name and password.
The installation of ImageMixer VCD2
starts.
• For details on how to use ImageMixer VCD2,
refer to software’s on-line help.