Sony DCR-HC90 - Manual (Page 67)

67
Dubbing/Editing
DCR-HC90 2-548-307-11(1)
Selecting still images for
printing (Print mark)
The DPOF (Digital Print Order Format)
standard is used to select images for
printing on your camcorder.
By marking images that you want to print
out, you do not need to reselect them when
you print them out. (You cannot specify the
number of printouts.)
1
Slide the POWER switch down to
turn on the PLAY/EDIT lamp.
2
Touch    [PRINT
MARK].
3
Touch the image that you want to
print out later.
2/ 10
PRINT MARK
101–0002
101 OK
appears
4
Touch  [END].
• To cancel Print mark, touch the image again to
cancel Print mark in step 3.
• Do not mark images on your camcorder if the
“Memory Stick Duo” already has some images
with the Print mark put on using other devices.
This may change the information of the images
with the Print mark put on using the other
device.
Printing recorded images
(PictBridge compliant printer)
You can print out pictures using a
PictBridge compliant printer without
connecting the camcorder to a computer.
Connect the supplied AC Adaptor to a wall
outlet for power.
Insert the “Memory Stick Duo” on which
still images are stored into your camcorder
beforehand.
Connect your camcorder to the
printer
1
Slide the POWER switch down to
turn on the PLAY/EDIT lamp.
2
Touch  [MENU] 
(STANDARD SET)  [USB-PLY/
EDT]  [PictBridge]   .
3
Connect the USB jack (p. 69) of
your camcorder to a printer using
the USB cable.
4
Touch (PICT. APPLI.)
 [PRINT].
When connection is complete,
(PictBridge connecting) appears
on the screen.
PRINT
101-0001
SET + -
101 1 / 10
END
2016
EXEC
PRINT
101-0001
One of the images stored on the
“Memory Stick Duo” will be displayed.
Continued 