Sony SVR-2000 - Manual (Page 10)

10 Parts, Controls, and Functions
filename[02 GET fm] model name1[PTV Receiver] [X XXX XXX XX (X1)]
Back Panel
1 Cntrl (control) Out Serial jack
Connect to your satellite set-top box so the SVR Recorder can
change channels on your satellite set-top box (see page 35).
B A/V Input jacks
a) Connect the right (red) and left (white) jacks to the cable box or
satellite receiver audio output jacks of the same color (see page 36).
b) Connect the composite video (yellow) jack to the cable box or
satellite receiver composite video output (see page 36).
c) Connect the S-Video jack to the cable box or satellite receiver
S-Video output jack if available. This connection provides a
better picture than the composite video connection (see page 37).
C A/V Output jacks
a) Connect the right (red) and left (white) jacks to the TV, VCR and/
or audio system audio input jacks of the same color (two sets
available) (see page 37).
b) Connect the composite video (yellow) jack to the TV and/or VCR
composite video input (two jacks available) (see page 37).
c) Connect the S-Video jack to the TV S-Video input jack if
available. This connection provides a better picture than the
composite video connection (see page 37).
D RF In
Connect to your off-air antenna or cable service if you do not
have a digital satellite receiver or cable box so the
SVR Recorder can receive sound and pictures (see page 38).
E RF Out
Connect to your TV if your TV does not have A/V inputs so
you can view sound and pictures (see page 38).
F Ch 3|4 switch
Set to the channel that does not broadcast a station in your
area. Tune your TV to this channel to view sound and pictures
from the SVR Recorder if you connected your TV using
RF Out (see page 38).
G Cntrl (control) Out IR jack
Connect to your satellite or cable set-top box so the SVR
Recorder can change channels on your satellite or cable
set-top box (see page 35).
H Phone Line jack
Connect to your phone line so the SVR Recorder can receive
program and other information from the TiVo Service
(see page 35).
I AC~In jack
Connect to an AC power outlet so the SVR Recorder can
receive power (see page 35).
This section provides a brief explanation of the jacks and switch on the back panel and where they are located. You can find detailed
information about each jack and switch, and how it is used, on the page number indicated in parentheses.
In AC Outputs Inputs Cntrl
Out
Phone
Line RF In
RF Out
R L
Audio
Video Ch
3 | 4
S-Video S-Video
Serial
IR
8
2 1 3 4
5 6 7 9
01_COV.book Page 10 Sunday, May 26, 2002 11:46 AM