Sony SVR-2000 User Manual

Page 29

Advertising
background image

29

Connection Examples

filename[03 hookup fm] model name1[PTV Receiver]

Co
nnec

ting Y

o

u

r

Eq
uipm

ent

Use this example if you have a satellite set-top box and either an antenna or cable (with

no cable box), and a VCR.

1

Connect the SVR Recorder to your satellite box.

Serial Connection - If your satellite set-top box has a Serial In jack, you can

connect the SVR Recorder to your box using the Serial Control cable (supplied).

Otherwise, use the IR connection.

IR Connection - Start by plugging the IR Control cable into the Cntrl Out IR

jack on the back of the SVR Recorder.

Next, locate the IR receiver on your satellite set-top box – it’s usually a small dark

red window or button on the front of the box. Place the IR Emitter (from the IR

Control cable) on top of the satellite set-top box, sticking out slightly. The IR

Emitter has an adhesive strip so you can adhere it to the set-top box. If it is not

possible to stick the IR Emitter directly onto the window, place the it in front of or

as close as possible to the window.

2

Connect your program source/video input to the SVR Recorder.

a) Disconnect any satellite or antenna/cable connections to your VCR and/or TV.

Connect the satellite box to the input of the SVR Recorder using the S-Video

cable (preferred) and the left (white) and right (red) Audio/Video cables. If you

don’t have an S-Video output, use the Yellow Composite Video cable instead.

b) Connect your coaxial antenna or cable to the RF In jack on the back of the

SVR Recorder.

3

Continue.

Now continue with step 3 on page 32.

Notes

Since you use a satellite set-top box to

receive your television signal, the SVR

Recorder needs to be able to change

channels on your box in order to record

shows and display live TV.

A serial connection works better than

IR, so use serial if possible.

If your satellite set-top box has two

jacks that look like Serial Control jacks,

use the one labeled “low speed data.”

You may need to use the 9 to 25 pin

serial adapter (supplied) to match your

box.

01_COV.book Page 29 Sunday, May 26, 2002 11:46 AM

Advertising