Sony SVR-2000 - Manual (Page 51)

51 Programming Your Remote Control
filename[04 setup fm] model name1[PTV Receiver]
Se
tting
Up Y
our
Sy
ste
m
Programming Your Remote Control
You can set your Remote Control to control your TV’s power, muting, and volume by
using the “Remote Control Setup” option on the Messages & Setup screen. Or you
can set your Remote Control to control the volume on your stereo if you have it
connected to your TV.
Once you’ve followed these steps to tell your Remote Control how to control your TV,
you’ll be able to put away your TV’s remote and use the Remote Control from now on.
You’ll only need your VCR’s remote for watching videotapes.
Follow these steps to set up your Remote Control using the on-screen code entry
method. If this method doesn’t work, try the Learning Mode Method (page 53) or Code
Search Method (page 54) methods.
1 Start at TiVo Central.
Press the TiVo button to go to TiVo Central.
2 Navigate to SVR Remote - TV.
Choose “Messages & Setup”, then “SVR Remote Setup”, then
“SVR Remote - TV”.
3 Identify your TV.
Use the CH (Channel) +/– buttons to scroll down the list of TV brands page by
page, choose your TV brand from the list, and press SELECT. If you have been
using a TV remote control other than the one that came with your TV, select your
TV brand, not the brand of the remote.
01_COV.book Page 51 Sunday, May 26, 2002 11:46 AM