Sony MZ-N1 - Manual (Page 24)

24
Transferring songs from the
computer to the MiniDisc (Check-out)
1
Install the supplied OpenMG Jukebox
software onto your computer.
For details, refer to the OpenMG Jukebox operating instructions.
Note
When you connect the recorder to your computer for the first time, make sure to install the
“OpenMG Jukebox software” and “Net MD driver” from the supplied CD-ROM. If OpenMG
Jukebox has already been installed, you should install the driver for the Net MD before
connecting the recorder to your computer. Even if the recorder is connected to the computer,
control of the computer will not be possible without installing the software and driver.
2
Make connections.
For details, refer to the OpenMG Jukebox operating instructions.
1 Insert a disc into the recorder.
2 Insert a charged rechargeable battery into the recorder.
3 Connect the AC power adaptor to the USB cradle.
4 Connect the recorder to your computer with the supplied dedicated USB cable.
5 Release HOLD and place the recorder (while stopped) on the USB cradle.
Notes
• Make sure to connect the AC power adaptor to the USB cradle and the AC power adaptor to a wall
outlet.
• This recorder supports USB 2.0 Full Speed (previously USB 1.1).
• Use of this recorder with a USB hub or a USB extension cable is not guaranteed. Make sure to use the
USB cable for connection.
• Connect only one MD recorder to your computer. If more than one recorder is connected, normal
operation is not guaranteed.
USB cable (supplied)
To USB connecting terminal
of the USB cradle.
To the USB connecting terminal
of your computer.
To the wall
outlet
AC power adaptor