Sony MZ-N1 - Manual (Page 51)

51
Labeling recordings
On the recorder
1
Insert a disc and do the following
operations.
To label a track:
Start playing or recording the track
you want to label, and then label the
track while the recorder is playing or
recording.
To label a group:
Turn group mode on (page 32) and
start playing or recording the track
within the group you want to label,
and then label the group while the
recorder is playing or recording.
To label a disc:
Label the disc while the recorder is
stopped or recording.
If the disc has group settings, turn
group mode on (page 32).
2
Press the jog dial.
3
Turn the dial until “EDIT” flashes in
the display, and then press to enter.
4
Turn the dial until the following item
appears in the display, and then press
to enter.
When labeling a track:
“
: Name”
When labeling a group:
“
: Name”
When labeling a disc:
“
: Name”
The cursor flashes in the letter input
area and the track, group, or disc is
ready to be labeled.
5
Flip the bar towards x.
The cursor shifts from the letter input
area to the character palette.
6
Select a letter using the bar and press
N to enter.
The selected letter appears in the
letter input area and the cursor moves
to the next input position.
DISPLAY
PLAYMODE
X
x Control
VOLUME +/–
Control bar
(X/x/./
>
/N)
GROUP/
CANCEL
Jog dial
T MARK
ABCDEFGHI
abcdefghi
The cursor flashes.
BCDEFGHI
abcdefghi
The cursor and character alternate.
ABCDEFGHI
A
abcdefghi
The cursor flashes at the next
input position.
continued