Sony MZ-N1 - Manual (Page 58)

58
Registering tracks or
groups as a new group
(Group Setting)
Do the following procedure to register
tracks or groups as a new group. The
tracks or groups must, however, be
sequential. If the desired tracks or groups
are not consecutive, you must move them
to make them consecutive before you can
register them (“Moving recorded tracks”,
page 60). The operation of this function
depends on whether group mode is on or
off.
• When group mode is ON:
— Several groups are registered as one
group.
— A track without a group setting can
be registered to an existing group.
• When group mode is OFF:
Several tracks are registered as one
group.
The following section explains the
operation when group mode is on.
• Registration of non-consecutive tracks
is not possible (for example, track 3 and
tracks 5 to 7 cannot be registered to a
new group).
• Tracks always appear according to their
order on the disc, not their order within
the group (even when group mode is
on).
Note
• It will not be possible to make a group setting
if the tracks, groups and disc name on a disc
exceed the maximum number that can be
input.
On the recorder
1
Press GROUP for 2 seconds or more
to turn group mode on.
2
While the recorder is stopped, press
the jog dial.
3
Turn the dial until “EDIT” flashes in
the display, and then press to enter.
4
Turn the jog dial until “ : Set”
flashes in the display, and then press
to enter.
The track number of the first track
(“STR”) appears in the display.
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
Group Group
Group Group
Making a new group
with 2 groups.
Making a new
group with
tracks 1 to 3.
Jog dial
GROUP
DISPLAY
Control
x
STR:001
END:001
: